7"/10" HDMI LCD Angle Adjustable Case

thingiverse

A case for a 7" / 10" LCD panel with HDMI input is what I'm after. The angle of the display can be adjusted, thanks to an articulating arm that makes it easy to position just right. Both horizontal and vertical mounting options are supported. The Supported LCD Panel / Driver Board includes: - A 7" panel from Chimei Inolux N70ICG-L21 - A 10" panel from AUO B101EVB01.0 These LCD panels can take up to 1920 x 1080 input, thanks to the driver board's scaling capabilities. The native resolution is 1280 x 800, but the scaling is so good that Windows UI looks fairly readable on both sizes. Color accuracy and viewing angles are pretty good too, especially considering the price range. Brightness is set to 50 by default, so it's a good idea to change it to 100. Required hardware includes: - 4x M3 6mm screws To print the case for the 7" panel, use the following models: - lcdpanel3v4 bottom v12.stl - lcdpanel3v4 top v8.stl For the 10" panel, use these models: - lcdpanel5 bottom v20.stl - lcdpanel5 top v6.stl Both panels require printing the following common parts: - lcdstudio5c v14.stl - lcdhid3 studio v11.stl - lcdpcb lid2 v7.stl - lcdpcb arm1 v21.stl - lcdarm40 v35.stl - knob.stl - Short_Arm_-_Threaded_rot90.stl The knobs and arms are identical to the source, except for a rotated arm that makes it easier to print. The source also has longer arms available. For printing arms and knobs with PLA, it's recommended to use a stronger profile like 4 vertical perimeters to prevent breakage. Other parts can be printed with the default profile.