6mm Bit Driver for Victorinox 111mm SAK

prusaprinters

IntroductionThis is a 6mm (1/4 inch) hex-bit driver I made for my 111mm Victorinox SAK. It will only work with 111mm Victorinox knives, but I will make one for 91mm ones as well once mine arrives.I tried to make it as durable and universal as possible, and it can be used for both light- and mid-duty tasks without problems. It can be printed both vertically and horizontally, with horizontal (the default position) being the more durable one according to my tests.Feel free to modify it as long as you credit me, as the item is under "Creative Commons - Attribution".I did my research into the smallest footprint possible while still being durable, and this is what I was able to make based on that.It fits on the flat-head/prybar/cap-lifter tool of the SAK. It's also made to lock-in into the tool (with a neat click sound!) for more versatility and less accidental discharges.The different versions111mm liner-lock (This one) - made for the liner-lock screwdriver/prybar/cap-lifter of the 111mm SAKs. The most durable and versatile one because of that. I don't have a non-liner-lock (older) version of the 111mm available, so this is only for the newer liner-lock ones.91mm - https://www.printables.com/model/404923-6mm-bit-driver-for-victorinox-91mm-sakTo check what kind of screwdriver/prybar/cap-lifter you have, check this page: https://www.sakwiki.com/tiki-index.php?page=Cap+LifterPrint SettingsPrinter Brand: CrealityPrinter: Ender 5Rafts: NoSupports: NoResolution: 0.12Infill: 85-100%Filament: Creality PLA/ABS BlackNotes:Only works on 0.12 resolution if printed horizontally due to the bit-driver slot needing the higher resolution to be printed. If you want to print on lower resolutions, (like 0.2, 0.28, etc.) you need to print it vertically.Post-PrintingInstalling a magnetAfter printing you can install a magnet in the 6mm (1/4 inch) hex slot if you'd like, but it's not required and still provides a snug fit without it.