67mm push on lens cap
thingiverse
Design a Customized 3D Printer Projector Holder Crafted with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=400798 **Project Setup** You can personalize the settings to fit your needs. 1. **Tighten or Loosen**: Adjust the looseness setting from its default value of 0 to a range between -5 and 5, allowing for some flexibility in projector alignment. 2. **Tether or Unattach**: Decide whether to secure your projector with a tether by setting "doTether" to "true". 3. **Inner Diameter**: Modify the idiam setting from its initial value of 70 to suit your project's specific requirements, typically ranging between 50 and 150. 4. **Height**: Determine the height adjustment (lidh) ranging between -5 and 5. 5. **Thickness Adjustment**: Adjust the thickness value to an optimal range suitable for the materials you're using.
With this file you will be able to print 67mm push on lens cap with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 67mm push on lens cap.