60mm Radial Fan Boot Dryer - USB Powered

prusaprinters

<p>This is a design for a boot dryer which uses 60mm radial fans which are typically 5V powered, and can be used with a standard USB power supply. This design was originally designed to work with USB battery banks for drying boots, wet clothing, and other gear while traveling.</p> <hr/> <h3>Revisions:</h3> <p>Revision 01 - Initial Release - November 28, 2020</p> <hr/> <h3>Bill of Materials:</h3> <ul> <li>6X - M3X16mm Flat Head Screws</li> <li>1X - 60mmX10mm Radial Fan</li> <li>2X - M3 Hex Nuts</li> <li>2X - Small Zip Ties (Used for strain relieving)</li> </ul> <hr/> <h3>Print Settings:</h3> <ul> <li>Material - PETG, ABS, or PLA</li> <li>Perimeters - 3 (with 0.4mm Nozzle)</li> <li>Supports - Not needed</li> <li>Infill Percentage - 30%</li> <li>Layer Resolution - 0.2mm</li> </ul> <hr/> <h3>Additional Details:</h3> <ul> <li>STEP File has been included so that modifications to the original model can be made easily.</li> <li>This was designed in SolidWorks.</li> <li>For additional airflow, thicker fans can be used with this design.</li> </ul> Category: Sport & Outdoors