608ZZ Bearing Hanging Filament Spool Mount v2.5

thingiverse

I decided to create a custom holder with a 6-inch bolt instead of using a 3D printed arm for the spool. Alternative Design: https://www.thingiverse.com/thing:3029252 I designed this hanging spool mount to fit under my workbench with my printers. I used leftover bearings from the fidget spinner craze and put them to use. The filament comes off the roll smoothly. Required Components: 1 x 5/16 in.-18 tpi Zinc-Plated Hex Nut (25-Piece per Bag) - (Homedepot) - (https://is.gd/33W8Yd) 1 x 5/16 in. Zinc Nylon Lock Nut (15 per Pack) - (Homedepot) - (https://is.gd/e1HuBL) 1 x 5/16 in. -18 tpi x 6 in. Zinc-Plated Hex Bolt - (Homedepot) - (https://is.gd/gfU2Uu) 4 x 608ZZ Bearings Printed Components Needed: 1 x HangingSpoolHolder_Base_v2.stl 4 x HangingSpoolHolder_Bearing_Spacer_v2.5_x4.stl 1 x HangingSpoolHolder_45mm_End_Cap_v2.5.stl 1 x HangingSpoolHolder_35mm_End_Cap_v2.5.stl (optional) All STLs are print-ready oriented.