
6 Cell Module Tray (Seed/Plug Tray)
prusaprinters
<p>UPDATE: There is now a V2 of these cell trays with an improved design please check out https://www.prusaprinters.org/prints/71854-seedmodulecell-tray-mk2-seedplug-tray</p><p>This 6 cell module tray for starting your seeds, designed to be strong and sturdy so that i can be reused many times, with a large hole in the base to aid drainage and the easy removal of plug (plant) once the plant is ready for transplant. They also nestle together nicely for storage when not in use.</p><p>Cell size (Approximate): is 40X40X61mm </p><p>Overall tray size(Approximate): 124X83X63mm</p><p>For those in the states they are sizes so you should be able to fit 12 into a standard 1020 Flat.</p><p>Edit 27/3/21: I have now upload a second version with air pruning slots, Use the same print settings as the standard version but consider using a hight modify to increase the amount of infill on the lower section with air pruning slots. </p><p>Edit 30/3/21: added another version of the 6 cell tray, this version is square with bigger cells.</p><p>Cell size (Approximate): is 60X40X61mm </p><p>Overall tray size(Approximate): 124X123X63mm</p><p><strong>Print Settings:</strong></p><p>Layer Hight - 0.3</p><p>Perimeters - 1 </p><p>Infill - 5-10% should be plenty</p><p>Support- None</p><p>Sugested Material- PETG, ASA</p>
With this file you will be able to print 6 Cell Module Tray (Seed/Plug Tray) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 6 Cell Module Tray (Seed/Plug Tray).