52mm spool holder inside a spool (for bearing M8, M22)
thingiverse
Timelapse of the print: https://youtu.be/nMRH_1Z1GiM. The bearing is a tight fit, but it works perfectly fine. Full printer settings include: Temperature extruder: 210°C Temperature bed remains unheated. Infill percentage is set to 25%. Material used for printing is PLA. Layer height is precisely 0.2mm. Adhesion is turned off completely. Support material is not needed in this print. The software being used is Reptier-Host V2.1.2. Slicing engine CuraEngine handles the task efficiently. Print speed is a moderate 50mm/s. Outer perimeter moves at a pace of 45mm/s. Infill fills in rapidly at 80mm/s.
With this file you will be able to print 52mm spool holder inside a spool (for bearing M8, M22) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 52mm spool holder inside a spool (for bearing M8, M22).