5-in-1 Compact Phone Grip

prusaprinters

<p>Remixed from [<a href="https://www.thingiverse.com/thing:2194278">thing:2194278</a>].&nbsp;</p><p>&nbsp;</p><p><strong>Updates:</strong></p><ul><li>Added “grip-knob-v2”. It's a shorter knob and feels better in the hand.</li><li>Added a new articulated grip with:<ul><li>real extendable selfie mode</li><li>taller and more practical stand mode</li></ul></li><li>Updated photos and parts needed.</li><li>Added an improved design with an aditional function “Hook mode” and more stable “Stand mode”.</li><li>Old models are moved to a ZIP file.</li></ul><p>&nbsp;</p><p><strong>Description:</strong></p><p>This phone grip has the following modes:</p><ol><li><strong>GRIP MODE</strong>: for a traditional camera style handling.</li><li><strong>STAND MODE</strong>: for taking group photos or a simple phone stand.</li><li><strong>HANDHELD MODE</strong>: for recording while moving.</li><li><strong>SELFIE STICK MODE</strong>: for increasing the distance a bit more.</li><li><strong>HANGING MODE</strong>: when you need to hang your phone from a rope or something.</li></ol><p>It's important to note that the knob in the base is also the hand support point. Put it on the right side if you're right-handed, and left side for left-handers. See the pictures for an example.</p><p>&nbsp;</p><p><strong>Parts needed</strong>:</p><ul><li>(1x) M5 x 65mm bolt (it also works with 50mm screw in my case)</li><li>(2x) M5 x 40mm bolts</li><li>(2x) M5 x 12mm countersunk bolts (10mm will also work)</li><li>(2x) M5 metal washer (for easier locking, optional)</li><li>(3x) M5 nuts</li><li>(2x) M5 self-locking nuts</li></ul><p>&nbsp;</p><p><strong>Printing recommendations</strong>:</p><ul><li>Supports are only needed in the ‘grip-base' bottom holes. Will print without supports though but will need a bit of cleaning.</li><li>It's holding your phone, so I'd print it with 3-4 perimeters for stronger parts. I printed mine with 2 perimeters and looks strong though.</li><li>Infill at 15-20% is ok.</li></ul><p>&nbsp;</p>