5 Gallon Bucket Lid Screw Top

thingiverse

Made to fit bucket with a brim dimension of 288mm inner, 304mm outer (8mm wide brim). Best used with TPU or other flexible filament. Brittle filaments will break if you try to force the lid on. In the outer ring, there are two ring grooves molded into the model. The top ring can fit an 8mm gasket, and the lower the bucket brim. If you opt to use no gasket, you can press your bucket's brim all the way to the top groove, but beware breaks if your filament is not very flexible. The inner cap also has a groove for a gasket to keep the threads from leaking (280mm x 2mm gasket). These parts are compatible with the screw top bucket lid from Home Depot. The 300mm crop version is for 300mm build volume printers, or if you want a lid that is easier to fit. To allow the full 300mm of your print bed to be used, you may have to modify your slicer settings, and your slicer's definition of your printer. Make sure there is no issue doing this with your printer.