5 Gallon Bucket Lid in Parts

prusaprinters

5 gallon bucket. Lid 6 parts. Openings with standard closure. For cables (Blank Cab Cable) and for extensions such as heating; level. The model is very stable. I set the connection in the lid a little lower to achieve more stability.Requires a spacer module as the first part. I installed the 80mm spacer as a filter element The passages are with the standard closure so that the net pots could be used there. A level indicator is also planned. At the moment I use a net pot in the lid to measure the EC and PHOn the outside of the lid there is a thread for each part in order to secure the lid against lifting with screws. M5 x 20 fit me   At least 3 recommended.   Every second. Inside, the 6 parts are screwed together with 3 M5x20 plus washers and nuts.You need 3 parts each with a retaining lug and 3 without, whether with or without a leadthrough.2 parts can be printed together on an MK3 Please divide the object in the slicer and then print the parts you want. There is a draft on Thingi https://www.thingiverse.com/thing:4580194   from daemonfox  but this model I completely redesigned in Fusion