5.25 Drive Bay SD to IDE adapter with card storage

prusaprinters

This is a bracket for the IDE to SD card from https://www.amazon.com/gp/product/B07YFPX7JBThere is a "long" and a normal version of the bracket; if using the normal version please verify the dimensions are correct as the "long" version has the latest changes.There are 15 slots on the right side of the bracket to allow storing cards currently not in use.Print the main bracket with supports touching buildplate, the other two parts do not need supports.For the light pipes, refer to the tutorial at https://www.printables.com/model/15310-how-to-print-glass for best results. The light pipe housing may need to be glued down to the PCB to minimize light leakage between the LED holes.  After printing I filed down the light pipes to a snug fit in the housing, then after mounting the adapter pressed the light pipes into the LED holes, seated them over the SMD LEDs, and hot glued it in place.  The housing should be seated as close to the PCB as possible to avoid leakage of light between the LEDs.The floppy style power connector is blocked, so you will have to use the Molex connector next to it to power the adapter.FreeCAD files are included.Print SettingsPrinter:HyperCubeRafts: NoSupports:Touching buildplateResolution: 0.2mmInfill:25%Filament:Filacube PLAEngineering Gray Notes: Light pipes were printed from clear PETG using the tutorial on Printables to improve clarity, light pipe housing printed from black Hatchbox PLA. You may need to tweak horizontal expansion to make them fit together, the CAD files have no allowances.  Category: Computer