5/16-3

thingiverse

Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following settings: - nut_height: set to 6 units - non_thread_length: set to 0 units - wing_ratio: set at 1 - texture: exclude feature - nut_resolution: adjusted to 0.5 - resolution: set to 0.5 - slot_depth: set at 2 units - head_type: configured as hex - nut_step_shape_degrees: calibrated to 45 degrees - thread_step: set to 1.25 - thread_length: specified at 76.2 units - slot_width: defined as 1 unit - inner_diameter: measured at 8 units - nut_type: set to normal type - nut_thread_step: adjusted to 2 threads - non_thread_diameter: defined as 0 units - nut_thread_outer_diameter: calibrated to 9 units - head_height: specified at 5 units - nut_diameter: measured at 12 units - facets: set at 6 facets - outer_diameter: measured at 14 units - thread_outer_diameter: calculated as 7.94 units - drive_type: configured as slot drive - head_diameter: specified at 12 units - type: identified as bolt - countersink: adjusted to 2 units - thickness: defined as 2 units - drive_diameter: measured at 5 units - step_shape_degrees: calibrated to 45 degrees