4x10 Large format film holder

thingiverse

Print the following:Side rail x2Bottom rail x1Upper body x1Top plate x2Light trap flat x2Septum x1No support are not needed if you print in the intended direction. Generally most parts are printed vertically standing on its outer edge, exeption is the top plate and septum.You need six heat 2 mm thread inserts and twelve counter sunk 2mm screws.No dark slide included. Must be sourced elsewhere.Designed for a dark slide of 0.8 mm thickness (1/32 inch).Light baffle not included. I used a 0,15 mm brass spring sheet that I cut and bend and covered i black cotton cloth. See images.You also need some fabric to attach light trap doors. I used hockey tape glued to the bottom rail.Septum and surfaces reflecting light to the film plane are suggested to be painted in black matte paint. I use this paint:https://www.amazon.se/dp/B07DXTVPKK/?coliid=I2H0D0B5MC45Z3&colid=3L9PP0TDD4S2J&psc=1&ref_=list_c_wl_lv_ov_lig_dp_it