4mm Thick Lithophane holderinator

prusaprinters

<p>I was looking for a stand to use with my Lithophane that had a 4mm slot to fit the frame. I couldn't find one, so I made my own. This one is meant to hold a T-light candle to provide the light. It came out pretty well.</p><p>The lithophane will be held at a 90' angle.</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Creality</p><p><strong>Printer:&nbsp;</strong></p><p>Ender 3 Pro</p><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports:&nbsp;</strong></p><p>No</p><p><strong>Resolution:</strong></p><p>0.16</p><p><strong>Infill:&nbsp;</strong></p><p>20%</p><p><strong>Filament:</strong> Creality PLA White Post-Printing =============</p><p><strong>Where did I get the Lithophane file?</strong></p><p>I printed my Lithophane for this stand from here; <a href="https://tool.itslitho.com/CreateModel">https://tool.itslitho.com/CreateModel</a> I used a 4mm frame. The width was 100mm, and the height was 60mm.</p><p>This stand does have an open-ended slot, so it will probably hold other dimensions as well as long as the thickness remains at 4mm.</p>