4inch Deadcat FPV quad

prusaprinters

WIP 4inch dead cat FPV drone.  additional parts will be published as I make revisionsThis is an ongoing project to build a 4s Li Ion LR cruiser.  Publishing the parts as of June 2022.  Based on the success I had with the 3inch Microbeast.  This project started off as a 2s version of rekon3 using a 4inch frame.  However after being unable to get the build under 250g AUW I threw out the idea of 2s LiIon and went 4s.   base plate stiffens the build.  in this version it is mostly held together in the fuselage with M2 hardware, and fused with acetone on the arms and head.   I would love to see a make using just the base plate cut in carbonIm still struggling with vibrations, especially when trying to fly this using a lighter 4s Lipoadditional items used (you cant print these, but you can give it a try):25x25 AIO FC/ESCmini FPV camera (not micro or nano unless you want to build spacers)M2 Male Female Hex Brass Spacer Standoff M2 x 4mm/6mm/8mm/10mm/12mm/16mm/20mm Steel Hex Socket Head2 or 3 blade 4inch props experimenting with several others most notably EMAX Scimitar 3.5x2.8x3 Tri-Blade.Motors  2004 2000kv  (project started with 1404 4500kv)todo:rebuild LiIon battery mountrefine bottom battery mount