4D Systems gen4 CTP-CLB Enclosure 5.0"

thingiverse

This is a 3D printable enclosure designed for wall or panel mounting the 4D Systems 5.0" gen4 products such as the gen4-uLCD-50DCT-CLB intelligent display module, the gen4-4DCAPE-50CT-CLB Beaglebone Display, and the gen4-4DPI-50CT-CLB Raspberry Pi Display. This enclosure is specifically designed for our 5.0" gen4 displays with a Cover Lens Bezel (CLB): https://4dsystems.com.au/gen4-ulcd-50dct-clb https://4dsystems.com.au/gen4-ulcd-50d-clb https://4dsystems.com.au/gen4-4dcape-50ct-clb https://4dsystems.com.au/gen4-4dpi-50ct-clb and variants/kits thereof. The following parts are required for assembly: 2x M4x10mm machine screws/bolts To assemble the enclosure, follow these steps: 1. Print the 2 parts of this enclosure. 2. Screw the backing plate (Insert) to your wall or enclosure/panel. 3. Attach the display's CTP-CLB bezel edge to the recess of the front cover (Body) of the 3D printed model using the 3M tape supplied on the edge of the displays CLB. 4. Place the front cover (Body) on top of the backing plate (Insert). 5. Carefully screw in 2x M4x10 screws into the sides to hold it together, and you have a nicely mounted enclosure. Cabling can be routed through the central hole in the backing plate (Insert), and there is ample room inside the enclosure for additional electronics if needed. If you would like to see this enclosure with modifications, please comment and request them, and we will try to accommodate your requests. The SLDPRT and STEP models are provided, so feel free to modify them as you see fit. Remember to add any modified designs as a remix. Enjoy!