4D Systems gen4 CTP-CLB Enclosure 3.2"

thingiverse

This is a 3D Printable Enclosure for Secure Mounting of 4D Systems 3.2" Gen4 Displays. The enclosure is specifically designed for our 3.2" gen4 display featuring Capacitive Touch and Cover Lens Bezel (CLB): https://4dsystems.com.au/gen4-ulcd-32dct-clb. It can also be used for the non-touch display version with CLB: https://4dsystems.com.au/gen4-ulcd-32d-clb, as well as its variants and kits. To assemble the enclosure, you will need: 2 x M4x10mm machine screws/bolts Instructions: 1. Print the 2 parts of this enclosure. 2. Attach the backing plate (Insert) to your wall or enclosure/panel using the provided screws. 3. Secure the display's CTP-CLB bezel edge to the recess of the front cover (Body) by sticking it in place with the 3M tape supplied on the edge of the display's CLB. 4. Place the front cover (Body) on top of the backing plate (Insert). 5. Carefully screw in the 2 x M4x10 screws into the sides to hold the enclosure together. Cabling can be routed through the central hole in the backing plate (Insert), and there is ample space inside the enclosure for additional electronics if needed. If you would like to see modifications to this enclosure, please comment with your request. The SLDPRT and STEP models are available for modification, so feel free to add them as a Remix if you make any changes.