44mm Apple Watch Series 5 w/Larger USB Slot

thingiverse

This is a modified design that accommodates the larger Apple Watch series 5 USB plug, which measures bigger than its predecessors. The original stand printed well, but the plug wouldn't fit through it. To fix this issue, I made minimal changes to the design while keeping all other dimensions intact. My Cura print settings for the CR-10mini are as follows: I started with the "super quality" preset and adjusted these parameters. The resulting print was excellent. Material: Hatchbox PLA Nozzle Temperature: 207°C Bed Temperature: 50°C Layer Height: 1.2mm Speed: 90mm/s Initial Speed: 40mm/s Fan Speed: 100% after 4 layers Retraction Settings: Distance: 6mm Speed: 25mm/s Prime Speed: 25mm/s (this setting prevents stringing in most materials) Supports: None Infill Density: 40% Cubic Pattern. Although not necessary, this dense infill provides extra weight to keep the cable from dragging it off the desk when the watch is removed. Bed Adhesion: RAFT. I've encountered prints that lift and warp due to inadequate adhesion in the past. Print Time: Approximately 5.75 hours