4080 Center Mount for Total Controls UFC

4080 Center Mount for Total Controls UFC

thingiverse

Center mount for Total Controls UFC. You will need a mounting plate for the Thrustmaster Warthog Throttle which shares the same base. Monstertech sells these (https://www.monstertechusa.com/product/joystick-throttle-mounting-plate/) or you can make your own if you are so inclined. The panel is mounted at a 30 degree angle which keeps it fully visible but should not obstruct the monitor. Mine is mounted to a Monstertech HOTAS mount. You will need M8 bolts ant M8 T-Nuts to mount this to your 4080 extrusion. In addition you will need to tap the two holes where the Warthog mounting plate will connect to. The bolts that come with the plate are M8x1.25. I found that cleaning up the holes with a 1/4" drill bit allowed just enough clearance for the tap to start. The bolts hold very tightly in in the threaded PLA but be careful not to strip when tapping or when bolting the warthog plate on.

Download Model from thingiverse

With this file you will be able to print 4080 Center Mount for Total Controls UFC with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 4080 Center Mount for Total Controls UFC.