4010/5015 fan and 3DTouch mounter for Kingroon KP3S 3.0

thingiverse

This is a modified parts for KINGROON KP3S 3.0, based on a modified parts created by fukumay, remixed to make it easier to print, stronger, and to implement a fan shroud that blows air in both directions. On the other hand, it is a little bit far from the original part's theme of weight reduction. ### Notice I think you need to reinsert the thermistor and heater cartridges from the other side in order to orient the heat block correctly so that it does not interfere with the shroud. ### Features realized by fukumey's parts - 3D Touch support - Adopted 4010 fan for heat sink to make it quieter. ### What this Remix has done - Made printing relatively easy and reduced the amount of support - Increased the thickness of the thin wall to increase strength - Changed the part cooling fan shroud to a Prusa i3 MK3S based bi-directional type to improve output quality for overhangs, etc. While I understand the purpose of the original part to incorporate the fan as part of the frame, I wanted to make it easier to handle, so I made the decision to increase the weight. Thanks to fukumay for making the original modified parts, as I definitely did not want to use the 3010 fan. ### BOM (Build of Materials) M3 18mm x 4 (for 4010 fan) M3 6mm x 2, M3 nuts x 2 (for 3D Touch) M3 4mm x 3 (for frame (stock)) M3 20mm x 2 (for 5010 fan (stock)) M3 12mm x 1, M3 nuts x 1 (for fan shroud) ### 3D Touch Offset X_PROBE_OFFSET_FROM_EXTRUDER 22.5 # X 偏移: -left +right [of the nozzle] Y_PROBE_OFFSET_FROM_EXTRUDER 0 # Y 偏移: -front +behind [the nozzle]