4 wheel Kossel Belt Carriage T-Rails

thingiverse

NOTE*** This is designed for T-Slot Rails. V-Slot rails are narrower with these wheels. Optical Sensor Mount and post: https://www.thingiverse.com/thing:5221000 I was having an issue where the 3 wheel belt carriage was twisting with a flying extruder. I created this to solve the issue and have more stability. This was on a MicroMake D1 Kossel printer. I used all the factory hardware and added a few more to complete the setup. Stock belt holder holes in the middle of the carriage are 20mm x 20mm apart in case you want to measure yours and see if it will fit. You can also do 20mm x 30mm or 20mm x 50mm with this option. You can get the most the parts from Home Depot. Here is what is needs to complete: Note** The M3 nuts for the tensioner part are really tight to make sure they don't spin. They will need to be pressed in. 3 - M5 x 25 bolt (Can use 30mm long also) (For wheels) 3 - M5 Nut (For Wheels) Poly wheels from Amazon - https://www.amazon.com/gp/product/B08QTPCGMR/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&psc=1 3 - M3 x 12 bolt (For stock belt holder) (Or just use the factory 3 bolts it came with) 6 - M3 x 12 bolt (For the tensioner on the side) 6 - M3 nuts (for the tensioner on the side) Printed this using supports touching build plate with PETG @ 250