4 Line LCD Display Stand

prusaprinters

<p>A simple desk stand for the common 4 line LCD Display (4x20) panel. Includes a way to tie off the wires to the connector on the I2C board mounted to the back of the display. The display is attached by four #6-32 threaded mounts. I included a print for a #6-32 nut incase you don't have some laying around.</p> <p>The stand is great in helping prevent accidental damage (i.e. shorts) when you are doing your prototyping; also keeps your fingers off the circuit board for the most part.</p> <h3>Print instructions</h3><h3>Category: Electronics Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> I3 MK3S</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.2mm</p> <p><strong>Infill:</strong> 15%</p> <p><strong>Filament:</strong> Hatchbox PLA Grey<br/> <strong>Notes:</strong></p> <p>Print face down to get a good edge on the inner rectangle and good threads on the mounting pins.</p> <p>Printing the nuts is optional, I found that the board fits tightly on the 4 pins. The nuts do help; I found that just installing 2 worked fine.</p> <h3> How I Designed This</h3> <p><strong>Designed in Fusion 360</strong></p> <p>I designed this in Fusion 360. I based my design on the original board. Here are the dimensions I used:</p> <p><a href="https://www.buydisplay.com/small-size-lcd-screen-20x4-arduino-connection-hd44780-i2c-character">https://www.buydisplay.com/small-size-lcd-screen-20x4-arduino-connection-hd44780-i2c-character</a></p>