4 Jaw Lathe Chuck

thingiverse

This is a plate of 100 mm with 4 reversible clamps for lathe or CNC. The mounting with the bushing is through 4 M6 screws at 66 millimeters like the 80mm plates. The plate was printed in ABS (perfectly it can be used some other materials of sufficient structural hardness such as PLA or PET-G). The rods were performed in Nylon 12, Even though there are two models one that will be made screw on the same piece and the other that uses the system of metal interlocked nuts. It is important when dealing with mechanical parts to achieve maximum hardness use 6 perimeter, 6 for roof and 6 for bottom and an infill of at least 45%. They were tested and it works very well to directly screw on the Nylon is a product that supports it totally. The M8 bolt that is the one that adjusts the clamps has to drill a slot to a depth of 2 mm. It is easily done with a sander and a drill. These slots serve the screws M4 trap the same. The clamps are reversible by disassembling the M6 screws. BOM 4-Tor. M8 Allen x 35 mm 8- Tor M4 Allen x 15 mm 4- Tor M6 x 20 8- Nuts M4 M6 bolts and nuts for adjusting the plate to the bushing.