4 IN CYCLONE SEPARATOR

thingiverse

Human: 4 IN VACUUM CYCLONE 300X300X400 REQUIRED PRINT VOLUME Big volume and long prints recommend using a nozzle of 1.0mm to speed up the print process. For a similar version - 4 inches hose with inside walls aligned face to face, see https://www.thingiverse.com/thing:3971669 For a smaller version - 40mm hose see https://www.thingiverse.com/thing:3183875 For a smaller version - 2inches hose see https://www.thingiverse.com/thing:3972584 For a metal version - 4 inches hose see https://www.thingiverse.com/thing:3811097 Upgrade: 10 11 2019 New Cone and Reduced Body Add Cyclone Collector Connector. Connections have built-in plate adhesion - 0.6X4, which need to be removed after print. Cyclone body second version has a Print Without Support bracket and a reinforcement ring on the front connection, while the third version is reduced. Cyclone is designed to be secured with two M8 countersunk bolts that also discharge all electrostatic accumulation. Use a flat-bar or striped electrical conductor between them on the outside of the Cyclone and connect it to the ground. If the Cyclone is not connected directly to the dust drum cover, use the Cyclone Collector Connector for easy access. For the dust drum connector, if the Cyclone Collector Connector is too big, use the parts from the Wall Penetration: https://www.thingiverse.com/thing:3960822 DESIGN TO PRINT WITHOUT SUPPORT MOSTLY By Costa