$4.95TOONED TELEVISION BIRDHOUSE

myminifactory

NOTE: FOR COMMERCIAL USE AND SELLING YOUR PRINTS, FULL ACCESS TO ALL MY MODELS AND EXCLUSIVE STLs JOIN MY PATREON: https://www.patreon.com/PA1_MAKER FEATURES:-Multiparts, no need for paint.-Easy to print.-Very few supports (only on the hatch opening of the main body,touching buildplate only)-All parts are already placed in the right orientation-Large cleaning hatch-Detailed exploded view to help you with the assembly-Big parts can be done with a layer height of 0.3 with no problem to speed up printing time. (House body on the pictures was made with 0.3 layer height)-Sturdy and strong design, with thick walls that won't deform overtime. CAREFUL: Do not print the main body and/or the front face in black! This will generate too much eat in summer and you will fry those poor babies... Choose light colors like i did!!! NOTE: This one is a little bit different than my other designs: Its made for large bird species. So its kinda big and the entrance has only one size option. IF YOU WANT IT FOR SMALLER BIRDS: Simply scale everything at 75%. You will get a smaller birdhouse with an entrance of 29mm, perfect for the small birds. You will need M3 screws instead of M4. You can scale it to any size in fact, simply consider that you will have to find matching screws to fit your scale, or redrill some holes. ;) Be sure to have your bridge settings at "ON". Watch for over extrusion. If you're having some fitting problems, simply sand gently the parts to help them fit together. But with a good calibration, everything should be fitting together very well. WALL MOUNTED INSTALLATION. Shape isn't really friendly for hanging installation. This one is very close to the limits of a ender 3 bed (234mm wide for the face) SO BE SURE TO HAVE YOU BED SETTINGS AT 235mm X 235mm with no skirt. SCALES :100% - Will use m4 screws.75% - will use m3 screws. If you have any problems, just send me a message. Have fun!!!