3x6 Iris Inspired Mechanical Keyboard

thingiverse

Wired exactly like the Iris but without the top row of keys. To use the QMK configurator with the Keebio Iris layout, simply leave the top row blank. I have included the Iris wiring schematic and keymap.json file that you can import into QMK Configurator. Use this website to make your hex file: https://config.qmk.fm/ Flashing your .hex firmware from QMK Configurator to both Pro Micros requires following these steps: https://www.youtube.com/watch?v=VR53Wo9Z960 Both the TRRS jack and the micro usb jack are quite fragile. To reinforce them, I covered both with hot glue. I highly recommend doing the same. The left and right sides of the keyboard are wired in a mirrored configuration. Parts needed: 44 switches and keycaps of your favorite type, I prefer Gateron Black Switches from Aliexpress 26awg wire is recommended; silicone wire works well because it won't melt when soldered 2 x 4.7k resistors 44 diodes can be found on Amazon at https://www.amazon.com/gp/product/B06XB1R2NK 2 Pro Micro microcontrollers are necessary, available on Amazon at https://www.amazon.com/gp/product/B07FXCTVQP 2 x 1/8in TRRS breakout boards can be purchased on Amazon at https://www.amazon.com/gp/product/B01N7NDCVI 1 x 3.5mm TRRS cable is also needed, available on Amazon at https://www.amazon.com/gp/product/B01IVRF8I2 18 M2.5 Socket Head Cap Screws are required, which can be found on Amazon at https://www.amazon.com/gp/product/B07F14J7X8