3x4 instax-wide Film Pack Adapter

prusaprinters

<p>A have a Graflex Anniversary Speed Graphic 3x4 camera and an old film-pack holder for expensive FP-100c (and equivalent) films, which fits the 3x4 camera. The film-back holder seemed like a perfect size for the Fujifilm instax-wide film sheets, so I decided to make an adapter or template (still unsure which word fits best) so the film-pack holder could use instax-wide film.<br><br>There are 4 parts to this design in all, and I suggest printing all of them, but you may find you don't need to, depending on the specific maker/model/version of your film-pack holder. The first, and main part is the template/adapter its self. That holds the film, so is definitely needed. The other three prints/parts are spacers, in 1mm, 2mm, and 3mm thickness (respectively). I did the spacers in that way so that you could, if needed, mix-n-match whatever works best for your film-pack holder to make any spacer from. 1mm to 7mm thickness if you use all three. Again, this is dependent on your holder. Mine uses all three, so I use all four of the prints/parts offered here.</p><p>To see actual prints of my design, check out the “Makes” tab (I print basically everything I design.)</p><h3>Print instructions</h3><p><strong>Printer:</strong> ANY (I used a Qidi X-one2)</p><p><strong>Rafts:</strong> No</p><p><strong>Supports:</strong> No</p><p><strong>Resolution:</strong> 0.2</p><p><strong>Infill:</strong> N/A (default is fine, infill isn't used)</p><p><strong>Filament:</strong> ANY (I used eSun PLA+)</p><p><strong>Notes:</strong><br>This really is a simple print. One of the simplest I've done, so there isn't a lot to say.</p><p><strong>Post-Printing</strong><br>Post printing is just testing fix and making adjustments, if needed (hopefully not, mine was perfectly fine with no adjustments at all)</p>