3M hook: Snap on two pieces

prusaprinters

<p>Hi there,</p> <p>Updated: adding a version 2 hook part to maybe make it look better.<br/> Updated 07272018: Version 3 with larger hook</p> <p>this is a snap on two pieces wall hook inspired by 3M command hook however following a no-support design. This one is designed to use with a 3M stick strip which can be bought separately. For those who likes the 3M stick strip (very useful for many purposes) but don't want to buy the hooks, this is the hook you will like.</p> <p>There are many one piece wall hook design used with 3M stick strip. The problem of one piece design is that you will always leave a ugly tail of the strip out there. My design solves the problem by hiding the strip beneath the hook entirely. The design include two parts: the wall part which is supposed to stick the strip and the hook part which fits into the wall part. I use white PLA. Print the hook part flat and wall part on its side.</p> <p>0.6 mm tolerance is used for the snap on part and 1 mm is used for the wall part to fit in. Less than 1 hour to print.</p> <p>Leave a comment and pictures of your makes.</p> <h3>Print instructions</h3><h3>Category: Organization Print Settings</h3> <p><strong>Printer Brand:</strong> Ultimaker</p> <p><strong>Printer:</strong> <a href="http://amzn.to/2BfKabj">Ultimaker 3</a></p> <p><strong>Rafts:</strong> Doesn't Matter</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.2 mm</p> <p><strong>Infill:</strong> 10%</p> <h3> How I Designed This</h3> <p><strong>inspired by 3M command wall hook</strong></p> <p>However following a no-support design.</p>