
3FTech PDW Sights V1
prusaprinters
<p>A set of basic adjustable sights for carbines, PDWs, large pistols, etc. that fit onto a 1913 Picatinny rail. The front sight is 3mm wide, and can be driven in/out for elevation adjustment. The rear sight is lateral drift adjustable, typical with pistol rear sights. A rear set screw secures the rear sight from being knocked out of position, show the firearm it's mounted to be dropped.</p><p>Three rear drift sights are available:</p><p>*4mm U Notch<br>*5mm U Notch<br>*5.5mm Aperture<br><br><br><br><strong>Print instructions</strong><br><br>Print Settings:</p><p>Extruder: 216C <br>Bed: 56C <br>First Layer Print Height: .20mm <br>Standard Layer Height: .14mm<br>Wall Thickness: .40mm<br>Wall Perimeters: 3 - 5<br>Infill: 20%<br>Infill Pattern: Gyroid<br>Material Flow: 100%<br>Support Material Percentage: 16%</p><p>Print the front and rear sight mounts on their front faces, and the rear sight drift on it's rear, flattest face.</p><p><br><br>Hardware Needed:</p><p>1x M5x30 Hex Socketed Machine Screw/Bolt</p><p>1x M5 Hex Nut (Be sure both bolt & nut are the same thread pitch.)</p><p>1x M3x10 Set Screw</p><p>1x M3x5 Set Screw</p>
With this file you will be able to print 3FTech PDW Sights V1 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 3FTech PDW Sights V1.