3DTouch/BLTouch Mount for EasyThreeD Printers

thingiverse

Mounting block for the Trianglelab 3DTouch Z Probe (a BLTouch clone) to suit EasyThreeD 3D Printers. Designed to fit the K7 model, but should suit most other models as the carriage design is the same. A spacer block is also included to replace the bed springs with, so that the bed can be tightened down. Please note that custom firmware is required to enable the use of the probe; this is still under testing. You will need to compile your own firmware based on https://github.com/schmttc/EasyThreeD-K7-STM32/ I printed the pieces pictured on another printer in PETG; but as the probe is mounted away from the hotend and the optional hotbed only goes up to 50C, PLA or any other material is fine. **BOM** -1 x 3D Touch Probe and included mounting screws -2 x M3x20 socket cap bolts and nuts -1 x 3D printed mounting block **To install** 1. Place the nozzle tip on the print bed, and measure a line from the bed 54mm up onto the back of the carriage 2. Remove the carriage shell 3. Align the top of the mounting block to the marked point, and mark the center of the mounting holes on the shell 4. Drill a 3.5mm hole in the carriage shell 5. Attach the mount block to he shell with M3x30 bolts 6. Attach the 3DTouch to the mount block with the included screws 7. Reassemble the carriage