3DFused Pi Cam Mount

prusaprinters

I recently got the XYZ Linear Rail kits from 3DFused.com and after I installed it, I didn't have a place for my Raspberry Pi Camera to mount to so I modified another thing (https://www.thingiverse.com/thing:2886101) and made it so it connects to the newer X/Y limit switch mount you can download from 3dfused's website. Since I had to modify that .stl as well, I have included it in this thing Nothing crazy special here. Just print the pieces. Clean them up if you suffer from the elephant foot, and it should fit snugly in the switch mount holes for it. It's also easier if you use a sharpie to mark where your current switch mount is tightened down to before removing it so you can place this one back in the same spot so you don't need to readjust it. For the actual camera housing, you can either use the one from the original thing linked above, or use this one (https://www.thingiverse.com/thing:3407867) that I had to use since I replaced the camera module on my cam with an autofocus module that sits a bit off center from the original one. both work with this bracket just fine. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Doesn't Matter Supports: No Resolution: .2 Infill: 40% Filament: Overture PLA Blue Category: 3D Printer Accessories