3D Watch Display

prusaprinters

<p>This is a custom designed display for wrist watches. I originally designed this display for my personal collection of NIXON watches. The original design was laser cut so I decided to re-draw the display so that it could be easily 3D printed. I removed the branding and scaled down the display slightly so it could fit in the Prusa MK3 build plate. It prints in 3 pieces and then gets glued together. You can purchase watch pillows on online, just make sure the pillows are not wider than 3” so they fit in the display at this scale. You can also print the pillows in flexible filament.</p><p>More information on the original design can be found here:&nbsp;</p><p><a href="https://www.coroflot.com/TperroneDesign/NIXON-Watch-Display">https://www.coroflot.com/TperroneDesign/NIXON-Watch-Display</a></p><p>&nbsp;</p><p>Parts Included:</p><p>Watch Display LEFT- It takes a little over 24 hours to print depending on the settings .I used 15% infill.</p><p>Watch Display RIGHT- It takes a little over 24 hours to print depending on the settings. I used 15% infill.</p><p>Watch Display INFILL- The orientation is vertical so the layer pattern can match the other parts, but it can be printed lying down for a faster print time. I used 30% infill.</p><p>Watch Display Overall- Full Display if your print bed is large enough.</p><p>Share a picture if you build one!</p>