3D Systems Cube 3 cartridge mod V1

thingiverse

I've made a V2 of this mod: http://www.thingiverse.com/thing:2060242 Brace yourself......The Cube 3 Firmware has been MODIFIED!!! :D Some brilliant guys (not me :P) successfully created a Toolbox, to modify the original Firmware, so that it doesn't overwrite the DRM-chip. I was skeptical first but I can confirm that IT WORKS!!! FINALLY the Cube is UNLOCKED!!!! :D Here's the download link with all the instructions you need:http://www.print3dforum.com/showthread.php/900-Cube3-Filament-*SOFTWARE*-Hack-is-here Many thanks to these guys for their efforts! Additional Material used: - Festo QSM-3 (3mm to 3mm) - PTFE OD 3mm/ID 2mm - PTFE OD 4mm/ID 3mm - Screws M3x16mm (2Pcs) As well as you will need: - Electric drill - M3 thread cutter - Screw driver-set The Cube 3 cartridges are well known for being UNRELIABLE. At least mine tend to break themselves every second time I'm trying to print something. My biggest problem was the tube releasing itself from the little CNC piece mounted to every cartridge. I think the pressure is just too high through all those sharp angles. So I modified the tubing as well. Just cut the upper part of the original plastic piece from the extruder needle. Tubes used are 1xID2mm/OD3mm (380mm) and a second tube 4mm ID over the 3mm tube to protect it from folding. At least one cartridge (I'm using just one and changing the internal filament roll only) works fine now! You can change the filament by disconnecting the tube from the Festo connector, cut the filament flush to the tube, insert the new filament just through the cogwheel and leave it just before the Festo connector begins. Put all together again and make a test-print until the new filament is through. Print Settings Printer Brand: 3D Systems Printer: Cube 3 Rafts: No Supports: No Resolution: 0.2 Notes: Filament Type: PLA Density: strong Fill Pattern: cross Supports: off Sidewalks: off Printtime: +/- 45min How I Designed This How Festo-Connectors work