3D Printing Toolbox with Prusa Research Logo

prusaprinters

Thought it would look good with the Prusa Research Logo embedded in the lid. First test print I had some z-axis issues and aborted, recalibrated and tried a small section of the logo/lid part as a test, and had some issues with adhesion in the letter area. Will continue to test, and perhaps revise the model. Might be easier to leave a cutout the shape of the Prusa Research panel in the lid and support it then print the panel separately and glue it in.v1.1 has a deeper cut of the logo out of the lid, and the print file is multicolor with support enforcers under the bridging that will have to happen on the lid to fill behind it. Color change at 2.1mm (layer 21) to 3mm (layer 27) at .15mm layer height. I have that section cut out to test with, and will try it with and without support enforcers and see what works best.v1.2 I somehow managed to export the stl with a random box attached to the toolbox. Fixed. unfortunately, it is the one I am printing at 10+ hour job. Hopefully I can cut if off the box when it is done.