3D Printer Heated Bed Power Module Mounting Brackets for the Digital Sqrt Little Driver (ANET A8, PRUSA, KOSSEL, MOSFET)
thingiverse
Little Driver - Mounting Bracket Head over to www.digital-sqrt.com (Purchase Here) for more information on the Little Driver Power Module. The Little Driver Power Module is a top-notch heater control board with numerous features you won't find elsewhere. It can power 30 volts at 30 amps directly to your heated bed or hot-end, and be controlled by an existing heated bed output or a digital signal. STL files are available for mounting brackets that attach securely to 2020 or 1515 aluminum extrusions. Alternatively, if you prefer a universal bracket that fits perfectly in just about any mounting scenario, we've got you covered. Brackets fit both the Little Driver Ver1.5 and Ver1.9 models without issue. If our brackets aren't your thing, be sure to check out Stewart Correll's awesome housing on Thingiverse: https://www.thingiverse.com/thing:2797455 Change Log: February 2-7, 2018 - updated links and pictures for clarity August 15, 2017: Updated mounting brackets with fan mounts for a 30mm fan. We've corrected some issues that may have caused problems when printing these brackets. To those who experienced difficulties, we apologize. May 14, 2017: Added new mounting brackets with fan mounts for a 30mm fan. These are still in the works and haven't been fully tested.
With this file you will be able to print 3D Printer Heated Bed Power Module Mounting Brackets for the Digital Sqrt Little Driver (ANET A8, PRUSA, KOSSEL, MOSFET) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 3D Printer Heated Bed Power Module Mounting Brackets for the Digital Sqrt Little Driver (ANET A8, PRUSA, KOSSEL, MOSFET).