3D Printer Filament Spool
pinshape
Tested and working - open source, quick, simple, standard (2" PVC connector available at any hardware store). Used when your filament comes on a subpar cardboard spool. Print two sides and secure them onto a standard 2" PVC pipe connector using PVC glue. Measures 180mm in diameter and holds a full 1kg of filament, rolling smoothly on a 3/4" PVC pipe. Requires an 8x8 bed to function properly. Scaling it down will prevent the design from fitting within the 2" PVC connector. I employ a battery-powered drill and a bolt glued into a 3/4" PVC pipe, reinforced with tape, to respool filament from a cardboard spool. This setup works efficiently and eliminates jams caused by the cardboard sides spreading apart and the filament slipping into the gap.
With this file you will be able to print 3D Printer Filament Spool with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 3D Printer Filament Spool.