3D Printer Enclosure - 24x24x30in

thingiverse

This is my custom 3D printer enclosure. The interior dimensions are a 24inx24in base and 30in height. My goal was to fit my Ender 3 Pro, with every printed part small enough to be printed on that machine, and in a standard size that was easy to find affordable materials to supplement the printed parts.This was designed to have 1mm clear sheets as the sides and top, with 1/2in wooden dowels through all of the frame, and 3/8 dowels in the frames of the doors, and the baseplate is a 24x24" piece of 1/2" plywood -Double opening doors, with lift-off hinges so they can be removed/stored when greater access is needed. and there is a support along the bottom to prevent sag over time. Switch panel integrated into forward-right side to control circulation fan and internal lightingmagnetic cord management panels along edges to conceal all wiring where possibleLED light mount in center of top-rear edgeEnclosure uses standard 120mm PC fan that is removable and exhausts thru 5"? carbon removable filter. While the enclosure is not explicitly air-tight, this is meant to have tight enough clearance to provide constant negative pressure to pull in fresh air through cracks and exhaust any particles through filter.rear port with removable insert to perfectly surround incoming cablespin holes around clear panel periphery to keep it taught and in place without bowing/sagging (not meant to hold weightDesigned for 24x24x30" dimensions, but a larger enclosure can potentially be made (in multiples of 6") just by printing more of the "straight" edge pieces (as long as you can find larger side panels/dowels to match). You may, however, have to edit the size of the front doors.Some Assembly Required...Parts List:-Unique Parts:--Corners:---Front-Lower-Right---Front-Lower-Left---Rear-Lower-Right---Rear-Lower-Left---Rear-Upper-Right---Rear-Upper-Left--Straights:---Front-Hinge-Right---Front-Hinge-Left---Door-Handle-Right---Door-Handle-Left--Misc.:---Filter Panel---Fan panel---Cord Pass-Upper---Cord Pass-Lower---Cord Cover-Rear-Lower-Right---Cord Cover-Front-Lower-Right---Cord Cover-Rear-Upper-Right---Cord Cover-Straight-Upper-LED---Door Catch-Common Parts/QTY needed--Corners:---Front-Upper/2---Door-Lower-Outer/2---Door-Lower-Inner/2---Door-Upper-Outer/2---Door-Upper-Inner/2--Straights:---Front-Lower-Ledge/2---Back/Side-Lower/4---Front-Upper/Side/4---Top/Side/8---Door-Side-Outer/2---Door-Hinge-Right/2---Door-Hinge-Left/2---Door-Side-Inner/4---Back/Side-Corded/4---Lower-Corded/2--Misc.:---Hinge Pin Short/2---Hinge Pin Long/2---Cord Cover-Straight/6---Panel Pins/16---Door Panel Pins/8All of my designs are unpaid passion projects that I choose to share, and I provide mesh models for free, but if you'd like to support me and my work, donations are greatly appreciated.