3D PRINTED RC CAR HUMMER H1 PICKUP body BY [AN3DRC]

cults3d

I present to your attention the best 3D printed Hummer H1 in the world !!! Attention only the pickup body is published here! In order to assemble the complete model (as in the photo), you also need to download the Chassis and Gearbox Attention! This body cannot be installed on the TRX-4 / SCX10 chassis! It has its own chassis! You can see a comparison of the dimensions of the TRX-4 chassis and the Hummer body in the last image! Chassis:https://cults3d.com/en/3d-model/game/3d-printed-hummer-h1-chassis-by-an3drc Gearbox: https://cults3d.com/en/3d-model/game/3d-printed-hummer-h1-gearbox-by-an3drc Wagon body: https://cults3d.com/en/3d-model/game/3d-printed-hummer-h1-wagon-body-by-an3drc Slantback body: https://cults3d.com/en/3d-model/game/3d-printed-hummer-h1-slantback-body-by-an3drc 2 door Pickup body: https://cults3d.com/en/3d-model/game/3d-printed-hummer-h1-2-door-pickup-body-by-an3drc Instructions with all the necessary information, a list of parts to buy and a list of used screws and nuts are published at the link: https://docs.google.com/presentation/d/1L4BBGL1017J_kETfUsCXH35lynjp4XiCya9uw-f2MtI Instructions with printing recommendations can be found at this link: https://docs.google.com/presentation/d/1vPexlNR0m7-I8J80tygvKohtnOg50FONwSv7r14FMBk The assembled model has the following technical characteristics: - This model is designed on a scale of 1 / 8.5. - Length approximately 550mm. - Width approximately 260mm (without mirrors) - Wheelbase - 388mm. - Track - 220mm. - 4x4 - All mechanisms are working! Doors, hood, tailgate can all be opened and closed. All details can be printed on a printer with a 200x200x200mm print area. I printed everything on my Ender 3 Pro. You can see more photos and videos on my Instagram: https://www.instagram.com/ant.nesh/ I created a Facebook group, if you have any questions you can ask them there https://www.facebook.com/groups/1611384019035352 Test ride video: https://www.youtube.com/watch?v=z_DQVSOeh70 Attention! Many details on the right side are mirrors of the left side. So if you can't find a part for the right side in the archive, just make a mirror copy of the left part in your slicer! Upd 31 Jan 2021--------------------------------------------- Big update v1.1 for chassis and bodies! Whats new come with this update you can see in this presentation https://docs.google.com/presentation/d/1TxHhYKVKwII4jKq7qA5wcRCS4tXbHYeXIsXKtNv49V0 Upd 12 Apr 2021---------------------------------------------- Update v1.15 -The hood has been changed: it is divided from two to three parts this will save filament on the construction of supports when printing. - Front base quarters changed. The Hood locker attachment point is now a separate part. If this area is damaged, you will not need to print the entire base quarter. -Added built-in support for the roof. This will reduce / remove swaying of the part when printing. -Small bugs fixed