3D printed racing rig for Nintendo switch,Mario kart

thingiverse

I've got a racing rig for my PS4, and I want to see if I can make a kid-friendly version for the Switch so my kids can play Mario Kart with it. After working on it for a few weeks, the little guy took it for a spin. WARNING: He said this was the worst racing experience he's ever had. LOL! You can check out the video before downloading or printing the parts to see how they fit together and how I used them. https://youtu.be/lwMlI2cfzrc The wooden step is completely optional, and I'm not sure why I added it. It just looked cool to me. Here are the parts I ordered from Amazon to build it: GF Piping Systems PVC Pipe Fitting, Flange, Schedule 80, Gray, 2" NPT Female https://amzn.to/3d3a1Xe Spears 188N Series PVC Pipe Fitting, Nipple, Thread on One End, Schedule 80, Gray, 2" NPT Male x Socket, 12" Length https://amzn.to/3cZS0ZD PVC Pipe Sch40 1-1/2 Inch (1.5) White Custom Length 2ft https://amzn.to/3aJYKcM Here are the STL files I'll be uploading to Thingiverse on May 1: Wheel stand.stl x1 Wheel holder.stl x1 Here are the settings I used in my printer (feel free to tweak them as needed): Printed with: (note: I got a lot of "hair" in the print) If you have better settings, please share and help me improve my printing skills! Material: PLA Layer height: 0.25mm Initial Layer Height: 0.15mm Infill percentage: 100% Infill pattern: line Printing temp: 210°C Build plate temp: 70°C Flow: 100% Retraction Distance: 3 mm Retraction Speed: 10 mm/s Print Speed: 60 mm/s Travel Speed: 150 mm/s Initial Layer print Speed: 25 Initial Layer travel Speed: 30 Z-hop when retracted: enabled Cooling fan: 100% Support pattern: zig zag Support density: 15%