3D PRINT READY!! Yang Xiao Long from RWBY

thingiverse

This print is ready to go and needs no further fixing to be printed. To find more 3D Print other RWBY models, click on the following links: https://www.thingiverse.com/thing:2357481 Ruby Rose; https://www.thingiverse.com/thing:2397963 Weiss Schnee; https://www.thingiverse.com/thing:2447958 Blake Belladonna; https://www.thingiverse.com/thing:2471634 Yang Xiao Long; https://www.thingiverse.com/thing:2504153 Velvet; https://www.thingiverse.com/thing:2753068 Nora; https://www.thingiverse.com/thing:2846440 Zwei (dog); and https://www.thingiverse.com/group/animefigures. Join the Anime Figure group to share and print anime figures, as well as receive updates on what's next at https://www.thingiverse.com/groups/animefigures. Support me on Patreon at https://www.patreon.com/AnimuAnimu/posts. This print already has all support material ready to go; do not add any more. The support material I have added to the file has tapered ends and easily breaks off, but be very careful when removing it, especially around the head. No cutting or gluing is necessary. Print with at least 30% infill and take care when removing supports because there are many fragile features. Do not print with a raft or support material. As you can see in the images, part of my support material failed while printing because I bumped the printer; do not panic if supports fail mid-print, they are mostly redundant and designed to recover. There are two STL files included, so print the 3DPrintReady file. I have also included a file without supports for those who want to add their own; note that a base is necessary or the model will tip over. Print this at .1mm layer height for optimal results. I did a lot of smoothing in Meshmixer, so the STL file is quite big even after being 'reduced', so be patient! I am working on making the whole RWBY gang, but my job is taking up all my time and Meshmixer keeps crashing, so be patient – these things are frustrating to get printable.