3D Maze Cube | Laberinto 3D
thingiverse
PRINT: 1xA1, 1xA2, 1xL1, 1xL2, 1xP1, 1xP2 1xCross No extra supports are required. Place the external faces down in the printer with ease. A minimum wall thickness of 0.8 mm for the faces and 1.2 mm for the cross is sufficient. 10-15% Infill is more than enough to get the job done. Avoid using 100% infill to prevent dimensional deviations from occurring. A maximum wall thickness of 2 mm for the faces should be your top priority. Some super glue will come in handy during assembly. Don't hesitate to use a piece of sandpaper on the flat edges if adhesion seems poor. Assemble it with the cross at the starting point, just like shown in the ASSEMBLY VIDEO (check out 2:45): https://www.youtube.com/watch?v=ng9BKqsn71I&t=6s
With this file you will be able to print 3D Maze Cube | Laberinto 3D with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 3D Maze Cube | Laberinto 3D.