37" Diameter Windmill / Spinner
thingiverse
My previous windmill/spinner was nice, but I wanted to print something big and functional on my printer, so here it is, a yard windmill/spinner that measures 37 inches in diameter. I designed it with minimal support needed; only the Mount requires some. Printed with PETG, my favorite material, using six layers on top, bottom, and sides, with twenty percent infill. You'll also need some hardware and three-quarter inch water pipe, which is included in a picture. Everything is relative to what you have, as I designed it based on the hardware I had on hand. I used six 4d finish nails, six 3mmx10mm nylon screws, two 1/4-20x2 inch bolts, four 1/4 inch washers, four 1/4-20 nuts, glue, and three-quarter inch water pipe with an outer diameter of one point zero five inches.
With this file you will be able to print 37" Diameter Windmill / Spinner with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 37" Diameter Windmill / Spinner.