360 Gopro Helmet Mount
thingiverse
I built this project to provide a mounting solution for attaching the GoPro's support to my DIY rotor mount. Here is how I made it: I purchased two empty aluminum tubes, one 1 meter long with a diameter of 2.0mm and the other 1 meter long with a diameter of 1.5mm. I cut the 1.5mm tube into two equal pieces and drilled two holes side by side at each end. Next, I cut the 2mm tube to a length of 20mm and drilled a hole in the center and two additional holes at each end. I removed the wheel from its mount and attached it to the smallest tube with the central hole. Then I connected the two tubes to the sides of the smallest tube using screws. https://www.youtube.com/watch?v=RzgpUxwpAZY&t=12s Print Settings: Printer Brand: RepRap Rafts: No Supports: No Resolution: 0.2 mm Infill: 20%
With this file you will be able to print 360 Gopro Helmet Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 360 Gopro Helmet Mount.