3 x AA Battery Case (Box) Eneloop

prusaprinters

<p>I designed this Battery-Case because I needed one for three of my Panasonic Eneloop Pro.</p> <p>It is a remix of the case by onethou. Thank you for your design, I really like it, but unfortunately my Eneloops doesn't fit in there - the case is a little too tight<br/> or the Eneloops are too fat...</p> <p>So I redesigned it using Fusion 360.</p> <p>It's a really easy print. I print the case with 0.35mm layer height as you can see in the print settings - the case is finished in just an hour.</p> <p>I uploaded 3 different sizes for the cap:</p> <ol> <li>normal (0.15mm space all around the base)</li> <li>tight (0.08mm space all around the base)</li> <li><p>very tight (0.00mm space all around the base)<br/> For me on my Prusa i3 MK3S I need to use the "very tight" version to get the cap clipping onto the box safely.</p> <p>Greetings</p> </li> </ol> <h3>Print instructions</h3><h3>Category: Containers Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> I3 MK3S</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0,35</p> <p><strong>Infill:</strong> 15%</p> <h3><strong>Filament:</strong> extrudr Greentec anthrazit Post-Printing</h3> <p>There is nothing to do after print.</p>