3 wheels RC / 3 Roues RC - 2 versions

thingiverse

A sleek, three-wheeled vehicle controlled remotely is unveiled, looking nothing out of the ordinary. Its front wheels feature large ball bearings angled on a low axis. These ball bearings originate from Airsoft 6mm balls. The tires were printed using Innoflex 60 (more flexible than PLA). The engine is an NTM Prop Drive Series 28-26A 1200kv motor, short shaft version, installed in the wheel and bolted to the fork. Steering is ensured by a 9 gram hobby servo inserted into its support attached to the aluminum tube. The base and hood were printed without supports, while the motorized fork was printed with supports. Specifications include: • Production in PLA and Innoflex 60 • Layer thickness: 0.3 mm • Hull thickness: 1mm • Filling: 20% • Temperature: 220C° • Supports: None • The two square tubes are made of aluminum, measuring 7.5x7.5 mm with a length of 125mm • Engine: NTM Prop Drive Series 28-26A 1200kv (short shaft version) https://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=39314 • The servo used for steering is a 9 gram hobby servo http://www.hobbyking.com/hobbyking/store/__662__HXT900_Micro_Servo_1_6kg_0_12sec_9g.html • The 3S 11.1V 1300mA lithium-ion battery • A black ring on the propulsion tire made from a piece of bicycle inner tube to increase grip on the ground.