3 level spice rack

thingiverse

To assemble the rack, you will need 3 planks 2.5" x 1/4" and 1 plank 1.5" x 1/4" (vertical support at the back of the rack; optional) (source from HomeDepot or Lowe's). Due to a slight variation in sizes you might want to test print the opening slot before buying the planks and scale the model Cut the planks to the desired length (make it at least 1/4" shorter than the width of the cabinet to fit it inside). Wall-to-wall racks cannot be inserted without removing the cabinet door. For the cabinets up to 15", print 2 side pieces ( mirror one in the slicer to get left and right sides ). For wider cabinets print one of the middle support pieces. Optionally you can print 2 pieces with passthrough holes and use them as sides. Slide the wooden planks into corresponding slots and (optionally) glue the assembly. Physical dimensions of the slots for wood boards: base: 65.5 x 6.8 mm ( roughly 2 1/2 x 1/4" ) support: 39.1 x 6.8 mm ( roughly 1 1/2 x 1/4 " ) Overall physical dimensions of the sides: 201 x 140 mm