3" CineWhooper by NSASchweiz

thingiverse

This is the 3" CineWhooper (30.5*30.5 as well as 20.5*20.5 mm holes in base plate for FC and ESC!) by NSASchweiz please be aware! The Green Plates (Top and Down Plate) should be CNC Cutted Carbon Plate. The White and light Red Standoffs can be printed with a 3D Printer. The standoffs are measuring for 3m Screws. The Yellow Parts are optional. At the moment there are a TX Antenna Holder (3mm diameter) in 3 different Versions as well as one Version including a GPS Holder and a Mount for a 14mm wide fpv Camera like a Runcam Split 4k and a 27.5mm Camera Mount as well! UPDATE 1: I Uploaded EVERY single Part as a 3mf format! Because of Export Size Errors with stl, please Use for 1:1 the single Part 3mf, not the FullThumbnail Files (these are just for the Thumbnail Pictures and to look at this Drone) Update 2: There was a few small changes in the Top and Bottom Plate. Some Standoffs are not necsessary anymore if you use the duckts. If not, you have to use the Standoffs or use your own screws. Also the Top and Downplate are a little bit prepared so it is possible to CNC cut them. I also uploaded the svg files, so you can go directly to CNC Cut the parts from Carbon. I highly recommend to use carbon for top and buttom plate! Update 3: My Drone is progress. Just ordered a CNC cut. Also im printing the other parts to test. Because i didn't printed and built this drone yet, this is a "still in progres". Basicly it is finished, but i just see it finished, when i built it by myself or i get some reviews of this built by you. So please be so nice, if you built this drone, let me know how it went! Thanks'a'lot bud! <img src="https://i.imgur.com/mjo4YrS.png" title="source: imgur.com" />