3 Axis Free Standing Video Projector Mount for Epson PowerLite Home Cinema 1040

prusaprinters

This is a remix so that the projector is free standing rather than supported from the ceiling. I only included the two parts that I changed. You'll need to download the other parts from Xqua's ceiling mount to finish the build: axis shaft, roof plate, & 5 screws. https://www.thingiverse.com/thing:4024833 The changes are as follows:Projector mounting holes changed to match Epson PowerLite 1040 projectorSupport bracket slots have been rotated 180° to account for the change from the projector hanging to the project standing.I added more plastic to both pieces for additional strength to support the projector (remove moment arms of gravity's force down on cantilevered supports). Print SettingsPrinter Brand: MonopricePrinter: Maker Ultimate**Rafts:** YesSupports: Yes**Resolution:** 120Infill: 45**Filament:** Inland PLA+ White Notes: I used a small amount of silicone grease on the threads to prevent them from seizing during assembly. I also used radial supports on the screws and other circular parts to align with the parts.I recommend printing one screw first and verify that it fits. The design is quite tight and you may need to shrink the screws by 1-5% to thread into the shaft.I intentionally left the holes to mount to the projector small so I could drill them larger as needed for screws I had on hand.Finally, my print bed is 200mm x 200mm and the Epson mount only fits at 25° to 35° rotation to be printed diagonally across the bed.   Category: Electronics