3/8" nut for Wanhao Z brace

thingiverse

Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 These nuts are designed to fit the 3/8" components of the Z-brace http://www.thingiverse.com/thing:1359774. The metal 3/8" nuts available from Bunnings in Australia do not fit the hexagonal recesses for the nuts, which are too large. See http://www.thingiverse.com/thing:1398577 for a longer version of this nut. Print Settings Printer: Cocoon Create (rebranded Wanhao Duplicator i3Ver. 2) Layer settings Rafts: No Supports: No Resolution: 0.1 mm Infill: 60% Notes Cura settings for PLA: Layer height: 0.1 mm Shell thickness: 0.8 Bottom/top thickness: 0.8 Fill: 60% Print speed: 50 Temperatures: 215/60 Support: Nil Adhesion: skirt Bottom layer speed: 10 Cooling fan: enabled. Post-Printing Instructions Customized using the following options: nut_thread_step = 1.59 nut_type = normal head_diameter = 12 drive_type = socket slot_width = 1 facets = 6 thread_step = 2 wing_ratio = 1 drive_diameter = 5 socket_facets = 6 nut_step_shape_degrees = 30 head_type = hex step_shape_degrees = 45 nut_thread_outer_diameter = 10.3 countersink = 2 texture = exclude thread_length = 25 slot_depth = 2 nut_diameter = 13.8 type = nut head_height = 5 resolution = 0.5 thread_outer_diameter = 8 socket_depth = 3.5 inner_diameter = 8 non_thread_length = 0 thickness = 2 non_thread_diameter = 0 nut_height = 6 outer_diameter = 14