28mm Miniature storage using 3qt. flip-top-bins - Updated

thingiverse

I have taken my <a href="https://www.thingiverse.com/thing:4625972">original</a> design and changed the way the supports and handles are attached. I have also, added a version that has six extra holes for magnets. These extra minis won't be as secure as the other fifteen, but they are great if you only need a bit more storage space. With the old design, getting the spacers to stand straight was a pain. With this new design, all you need to do is thread them in place. These use the same spacers as my <a href="https://www.thingiverse.com/thing:5022210">Stackable Miniature Storage Trays.</a> If you need a spacer longer than 55mm, you can use the ones from that. For each bin you will need: 1x bottom platform 1x top platform 4x spacers - Pick the size that best fits the minis you are storing. 4x handles - Pick the same size as the spacers. 1x 3qt. flip top bin 30x 6x2mm magnets - optional 42x 6.2mm magnets - optional - If using the version with extra holes The threads are modeled with a 0.2mm offset to allow for printers that aren't perfectly calibrated. <a href="https://www.dollartree.com/plastic-storage-boxes-with-hinged-lids-3-qt/987218"> Bins I used.</a> <a href="https://www.amazon.com/gp/product/B07KJ9H31P/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1">Magnets I used.</a> I am open to suggestions if you find any issues or anything that can be improved upon. <a href="https://www.thingiverse.com/thing:4625078">My D&D bases.</a> <a href="https://www.thingiverse.com/thing:4853232">Square Bases.</a> I have added a tool to help with indexing the magnets. The side labeled "S" is for the storage tray and the "B" side is for bases. I put a magnet into a base and stuck another magnet to it, to index the "B" side correctly. For the "S" side, I just made sure the base repelled from the magnet I inserted.